button cancel
Pokušajte pretraživati po ključnim riječima, kodu narudžbe ili proizvoda ili serijskom broju, npr. „CM442“ ili „tehničke informacije“
Unesite minimalno 2 znaka za pokretanje pretrage.
product picture of the ultrasonic flow measurement instrument FLOWSIC100

FLOWSIC100
ultrasonic flow measurement instrument

Volume flow measuring devices for continuous emission monitoring

IFL100
Učitavanje cijene
Cijene privremeno nisu dostupne
product picture of the ultrasonic flow measurement instrument FLOWSIC100
  • F
  • L
  • E
  • X
©Endress+Hauser

Kratke specifikacije

  • Measured variables

    Volumetric flow a. c., volumetric flow s. c., gas velocity, sound velocity, gas temperature

  • Measuring range

    Gas Velocity: 0 ... ± 40 m/s

Područje primjene

FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.

  • Emission monitoring in the chemical and hydrocarbon processing (HPI) industry

  • Emission measurement in the processing industry (cement, iron and steel, glass)


Device properties:

  • Rugged titanium converters for long service life

  • Corrosion-resistant material for use with aggressive gases (option)

  • Integrated measurement via duct diameter for types H, M, and S

  • Probe version PR for cost-saving, single-sided installation in duct

  • Automated operational check with zero and reference point test

Prednosti

  • Reliable flow measurement for ducts with small up to very large diameters

  • No purge air required for applications with gas temperatures up to 260 °C

  • Minimum operating and maintenance costs

  • Accurate measuring results under difficult measuring conditions

  • Measurement without pressure loss, therefore no influences on the process

  • User-friendly operation via SOPAS ET software

  • Reliable function monitoring due to enhanced diagnosis

Xpert odabir

  • Specijalizirani proizvodi

  • Dizajnirano za zahtjevne aplikacije

Tehnička izvrsnost

Jednostavnost

Promjenjivo

Xpert: Master your most challenging applications ©Endress+Hauser

  • Jednostavni proizvodi

  • Jednostavno je odabrati, instalirati i rukovati

Tehnička izvrsnost

Jednostavnost

  • Standardni proizvodi

  • Pouzdano, robustno i s malo održavanja

Tehnička izvrsnost

Jednostavnost

  • Vrhunski proizvodi

  • Izuzetno funkcionalno i prikladno

Tehnička izvrsnost

Jednostavnost

  • Specijalizirani proizvodi

  • Dizajnirano za zahtjevne aplikacije

Tehnička izvrsnost

Jednostavnost

Promjenjivo

FLEX odabir Tehnička izvrsnost Jednostavnost
  • F
  • L
  • E
  • X

Fundamental odabir

Udovoljite svojim osnovnim potrebama u mjernju

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Lean odabir

Jednostavno upravljajte svojim osnovnim procesima

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Extended odabir

Optimizirajte svoje procese s inovativnim tehnologijama

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Xpert odabir

Ovladajte svojim najizazovnijim aplikacijama

Tehnička izvrsnost
Jednostavnost

Promjenjivo
Loading alternative products

Uspješne priče

  • Tough conditions: Installation at the difficult-to-access measuring point Tough conditions: Installation at the difficult-to-access measuring point

    Reliable flow measurement despite difficult conditions

    Schluchseewerk AG wanted to record and optimize the efficiency of its turbines at the pumped storage plant in Wehr. Endress+Hauser offers the optimum solution with its ultrasonic clamp-on flowmeter.

  • GPsol Wellchecker on a pumpjack GPsol Wellchecker on a pumpjack

    Real-time analysis of mature oil wells

    GPsol, together with Endress+Hauser, developed a system that individually measures each component of extraction wells and provides as much information as possible about the current flow.

  • Picture of customers Wintershall in front of hydrocarbon calibration rig at Endress+Hauser Flow Picture of customers Wintershall in front of hydrocarbon calibration rig at Endress+Hauser Flow

    Reliable calibration using hydrocarbons

    On the new factory calibration rig from Endress+Hauser, Wintershall Dea can now calibrate Promass F with hydrocarbons as legally mandated – a significantly cheaper option than on-site calibration.

Također vas može interesirati

Usporedite proizvode

Poštujemo vašu privatnost

Upotrebljavamo kolačiće kako bismo poboljšali vaše iskustvo pretraživanja, prikupljali statističke podatke za optimizaciju funkcionalnosti internetske stranice i omogućili personalizirane oglase ili sadržaj.

Odabirom opcije "Prihvati sve" pristajete na našu upotrebu kolačića.
Za više informacija pročitajte našu Politiku o kolačićima .