Pokušajte pretraživati po ključnim riječima, kodu narudžbe ili proizvoda ili serijskom broju, npr. „CM442“ ili „tehničke informacije“
Unesite minimalno 2 znaka za pokretanje pretrage.
Picture of thermal mass flowmeter Proline t-mass 65I insertion for industrial gases & compressed air

Proline t-mass 65I
thermal mass flowmeter

Robust flowmeter with adaptation to changing process conditions

65I
Učitavanje cijene
Cijene privremeno nisu dostupne
from CHF ??.-
Picture of thermal mass flowmeter Proline t-mass 65I insertion for industrial gases & compressed air ©Endress+Hauser

Proline t-mass 65I for industrial gases and compressed air

Kratke specifikacije

  • Max. measurement error

    Gas: 1.5% o.r. (10 to 100% o.f.s.), 0.15% o.f.s. (1 to 10% o.f.s.)

  • Measuring range

    20 to 720000 kg/h (44 to 1587328 lb/h)

  • Medium temperature range

    -40 °C to +130 °C (-40 °F to +266 °F)

  • Max. process pressure

    -0.5 to 20 bar gauge (-7.25 to 290 psi gauge)

  • Wetted materials

    Transducer: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022)
    Insertion tube: 1.4404 (316/316L); Alloy C22, 2.4602 (on request)
    Transducer guard: 1.4404 (316L)
    Compression fitting: 1.4404 (316/316L)
    Ferrules: PEEK 450G, PVDF
    Bonded seals: EPDM, Kalrez 6375, Nitrile and 316/316L

Područje primjene

The t-mass 65I was designed for the direct mass flow measurement of industrial gases and compressed air. With a turndown of typically 100:1 it can measure accurately operational flow rates and off line leakage. The integrated gas engine allows the customer to configure the device for 20 freely selectable gases. The t-mass 65I insertion version is suitable for large pipelines or rectangular ventilation ducts.

  • Measuring principle is characterized by a high operable flow range and direct mass flow measurement

  • Measurement of gases and gas mixtures in circular piping or rectangular ducts.

Device properties

  • Insertion version for nominal diameter DN 80 to 1500 (3 to 60")

  • Medium temperature up to +130 °C (266 °F)

  • High accuracy: ±1.5 % o.r. (10 to 100 % o.f.s.)

  • Device as compact or remote version

  • 4-20 mA HART, PROFIBUS PA/DP, Modbus RS485, FF

  • Worldwide approvals (Hazardous areas)

Prednosti

  • Measurement of gases and gas mixtures in circular piping or rectangular ducts

  • Plant safety – high accuracy and repeatability for a wide range of utility and process gases

  • Cost-effective measurement – easy installation, negligible pressure loss and maintenance-free

  • Reliable flow trending – multivariable measurement

  • Fast and efficient commissioning – guided operating menus

  • High plant availability – self-diagnostics and error monitoring

  • Automatic recovery of data for servicing

Videozapisi

  • The Thermal Flow Measuring Principle

Uspješne priče

  • Jednostavni proizvodi

  • Jednostavno je odabrati, instalirati i rukovati

Tehnička izvrsnost

Jednostavnost

  • Standardni proizvodi

  • Pouzdano, robustno i s malo održavanja

Tehnička izvrsnost

Jednostavnost

  • Vrhunski proizvodi

  • Izuzetno funkcionalno i prikladno

Tehnička izvrsnost

Jednostavnost

  • Specijalizirani proizvodi

  • Dizajnirano za zahtjevne aplikacije

Tehnička izvrsnost

Jednostavnost

Promjenjivo

FLEX odabir Tehnička izvrsnost Jednostavnost
  • F
  • L
  • E
  • X

Fundamental odabir

Udovoljite svojim osnovnim potrebama u mjernju

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Lean odabir

Jednostavno upravljajte svojim osnovnim procesima

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Extended odabir

Optimizirajte svoje procese s inovativnim tehnologijama

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Xpert odabir

Ovladajte svojim najizazovnijim aplikacijama

Tehnička izvrsnost
Jednostavnost

Promjenjivo
Usporedite proizvode
Koristimo kolačiće za pohranjivanje podataka na vaš uređaj što nam pomaže u prilagođavanju i poboljšanju vaše interakcije s nama. Više o kolačićima možete pronaći u politika privatnosti.